Solar Swimming Pool Heaters

By installing a solar pool heater, one can significantly reduce swimming pool heating costs. Solar pool heating is the most cost-effective use of solar energy in many climates. Solar swimming pool heaters are cost competitive with both gas and heat pump pool heaters, and they have very low annual operating costs.

So How Do Solar Swimming Pool Heaters Work?

Majority of solar pool heating systems include the following:
•    A solar collector — the device through which pool water is circulated to be heated by the sun
•    A filter — removes debris before water is pumped through the collector
•    A pump — circulates water through the filter and collector and back to the pool
•    A flow control valve — automatic or manual device that diverts pool water through the solar collector.

Pool water is pumped through the filter and then through the solar collector(s), where it is heated before it is returned to the pool. In hot climates, the collector(s) can also be used to cool the pool during peak summer months by circulating the water through the collector(s) at night.

Some systems include sensors and an automatic or manual valve to divert water through the collector(s) when the collector temperature is sufficiently greater than the pool temperature. When the collector temperature is similar to the pool temperature, filtered water simply bypasses the collector(s) and is returned to the pool.

Solar pool collectors are made out of different materials. The type you’ll need depends on your climate and how you intend to use the collector. If you’ll only be using your pool when temperatures are above freezing, then you’ll probably only need an unglazed collector system. Unglazed collectors don’t include a glass covering (glazing). They are generally made of heavy-duty rubber or plastic treated with an ultraviolet (UV) light inhibitor to extend the life of the panels. Because of their inexpensive parts and simple design, unglazed collectors are usually less expensive than glazed collectors. These unglazed systems can even work for indoor pools in cold climates if the system is designed to drain back to the pool when not in use. Even if you have to shut the system down during cold weather, unglazed collectors may be more cost effective than installing a more expensive glazed collector system.

Glazed collector systems are generally made of copper tubing on an aluminum plate with an iron-tempered glass covering, which increases their cost. In colder weather, glazed collector systems—with heat exchangers and transfer fluids—capture solar heat more efficiently than unglazed systems. Therefore, they can be used year-round in many climates. Glazed collectors also can be used to heat domestic hot water year-round.

Both glazed and unglazed collector systems should include freeze protection if they’ll be used in colder conditions.

This information was directly taken from Energysavers.gov , please see their site for further information.